Diesel Generators

Generac Starter Video Review

I need some generator advice, please. We have started this Generac 7550 every month and let it...

Generac Pressure Washer Troubleshooting

Here I will explain how to troubleshooting generac pressure washer, there are steps to verify that the kit is part of the damage, we would like to be helpful. Generac pressure washer problem:

Make sure you use the correct nozzle pressure and that is not locked or damaged. remove any block or replace the nozzle if damaged.

Check if the penetration of water or the strainer suction tube are locked and erase a block.

Ensure that there is an adequate supply of water and the water temperature does not exceed 100 ° F.

Check the high pressure hose is locked and a block erase or replace if damaged.

Check the gun for loss and accessories set to remove them.

Contact a service center of high pressure pump Generac itself is defective.

Make sure that the siphon tube is completely immersed in the detergent.